To Next PageTo Next Page
Need help?Do you have a question about the HPE Edgeline EL8000 and is the answer not in the manual?
General| Processor | Intel Xeon Scalable processors |
|---|---|
| Memory | DDR4 ECC |
| Storage | 2 x 2.5 |
| Expansion Slots | PCIe Gen3 slots |
| Power Supply | Redundant Power Supplies (depending on configuration) |
| Operating Relative Humidity | 90% |
| Management | HPE iLO 5 |
| Chassis Height | 1U |
| Operating Temperature | 0° to 55°C (32° to 131°F) (depending on configuration) |
Steps to set up, install, and configure the HPE Edgeline EL8000 Converged Edge System.
Information on safety, environmental, and regulatory compliance for the system.
Verification of site conditions like space, airflow, temperature, and power for system installation.
Guidance on minimum clearance for servicing and adequate airflow around the system.
Electrical regulations and guidelines for installing IT equipment by licensed electricians.
Ensuring safe and reliable operation by installing the system in a well-ventilated, climate-controlled environment.
Description of external and internal server features and components with itemized list.
Overview of the HPE Edgeline EL8000 Converged Edge system.
Details on the EL8000 system's capacity for up to four 1U HPE ProLiant e910 server blades.
Information on the EL8000 chassis capacity for up to two 2U HPE ProLiant e910 server blades.
Details on the EL8000 chassis configuration with one 2U and two 1U server blades.
Explanation of AC power supply LED status indicators and their meanings.
Explanation of DC power supply LED status indicators and their meanings.
Identification of the physical components of the Chassis Manager with numbered labels.
Step-by-step instructions for installing the two-post rack mount kit for the EL8000 chassis.
Procedure for installing the four-post rack mount kit for the EL8000 chassis.
Methods for safely powering down the HPE Edgeline EL8000 system and its blades.
Methods for powering on the HPE Edgeline EL8000 system and its blades after a shutdown.
Prerequisites and steps for safely removing a server blade from the EL8000 chassis.
Procedure for installing HPE ProLiant e910 Server Blades into the EL8000 chassis.
Tasks to prepare for system configuration, including network verification and planning.
Options for initial access and configuration of the Edgeline EL8000 Chassis Manager.
Steps to connect to the Chassis Manager via its web interface using an Ethernet connection.
Procedure to connect to the Chassis Manager via CLI using a serial session and PuTTY.
Browser requirements for accessing the Edgeline EL8000 Chassis Manager web interface.
Instructions to enable JavaScript in Internet Explorer for the Chassis Manager web interface.
Steps to log in to the Edgeline EL8000 Chassis Manager web interface with default credentials.
Overview of web interface controls, including hiding the pane, logout, lock, and help icons.
Tasks to complete network configuration, including domain name and IP addressing.
Information on the multiple options provided by Edgeline EL8000 Chassis Manager for network connection.
Procedure to view network configuration summary details and access network settings.
Details on Name, Host Name, MAC Address, FQDN, and Speed from the network summary.
Summary details for IPv4 address, origin, gateway, and subnet mask.
Summary details for IPv6 address, address state, gateway, and prefix length.
Steps to configure host name and domain name for the subsystem.
Guidelines and limitations for setting subsystem and domain names to avoid namespace issues.
Procedure to configure IPv4 settings, including DHCPv4, static IP, and DNS.
Explanation of the DHCPv4 setting, which enables automatic IP address assignment.
Settings for configuring static IPv4 address, subnet mask, and gateway.
Configuration for Primary, Secondary, and Tertiary DNS servers.
Procedure to configure IPv6 settings, including global configuration, auto mode, and static addresses.
Details on IPv6 configuration options like client application preference and auto mode.
Instructions for entering static IPv6 addresses and prefix lengths.
Procedure to view installed firmware information for various components.
Information on the different types of firmware listed on the Firmware page.
Details displayed for each firmware type, including name and version.
Procedure for updating firmware directly or using the Chassis Manager Repository.
Steps to upload firmware components to the Chassis Manager Repository.
Procedure to install firmware from the repository to the system.
Instructions for managing chassis power and resetting the Chassis Manager module.
Tasks to prepare the system for service, including user accounts, certificates, and backups.
Information on how to register the product for quicker service and support.
Steps to prepare the system for diagnosis and troubleshooting.
Essential warnings and information to review before performing troubleshooting procedures.
Key safety information to familiarize with before troubleshooting the system.
Explanation of symbols indicating hazardous conditions found on the equipment.
Important warnings and cautions regarding equipment repair, installation, and rack stability.
Precautions to prevent damage from static electricity when handling system parts.
Procedures and precautions for preventing electrostatic discharge.
Methods for grounding to prevent electrostatic discharge when handling sensitive parts.
Steps to collect symptom information and download logs for troubleshooting.
Procedure to verify environment, record errors, collect tools, and review logs for diagnosis.
Section dedicated to identifying and resolving hardware-related issues.
Common hardware issues encountered with the system.
Description and cause of the CM reverting to DHCP when moved between chassis.
Troubleshooting specific issues related to the system's power functions.
Symptom and action for a CM module not fully inserted causing fan noise and communication issues.
Links to view warranty information for various HPE product lines.
Information on safety and compliance for server, storage, power, networking, and rack products.
Information on chemical substances, environmental, and safety compliance per REACH and RoHS.
Manufacturer and local representative information for the Eurasian Economic Union.
Declaration of compliance with Turkey's AEEE Regulation for material content.
Declaration of compliance with Ukraine's technical regulations for hazardous substances.
FCC notice regarding compliance with Part 15 for Class A digital devices.
Industry Canada notices for license-exempt RSS standards and RF exposure.
Information on RF exposure limits, antenna types, and gain for FCC and Industry Canada.
Warning regarding interference protection for Brazil certification.
Important notice regarding 5.2GHz and 5.3GHz band usage in Japan.
Cautionary notice for Korean Class A equipment regarding its use in home environments.
Details on operating and non-operating temperature and humidity ranges for the system.
Standard specifications including temperature and humidity ranges for the system.
ASHRAE Class A4 specifications for temperature and humidity, including GPU impact.
Extended specifications for temperature and humidity of Edgeline systems.
Physical dimensions (height, depth, width) and weight of the EL8000 chassis with different blade configurations.
Information on the available power supply options for the system.
Specifications for the 1500W AC Hot Plug Power Supply, including input and output details.
Specifications for the 1500W DC Hot Plug Power Supply, including input and output details.
List of general HPE websites for information and documentation.
How to access live assistance and support services from HPE.
Information on how to access and download software updates for HPE products.
Details on HPE's Customer Self Repair program for product servicing.
Information on HPE's remote support capabilities and Proactive Care services.
Links to view warranty information for various HPE product lines.
Information on product regulatory compliance, including safety and environmental data.
Details on chemical substance information (REACH) and environmental data (RoHS).
How to provide feedback to improve HPE documentation by reporting errors or suggestions.
