Need help?Do you have a question about the HPI Racing TROPHY 3.5 and is the answer not in the manual?
General| Engine Type | Nitro |
|---|---|
| Displacement | 3.5 cc |
| Drive Type | 4WD |
| Width | 300 mm |
| Scale | 1/8 |
| Engine | HPI Nitro Star F3.5 |
| Fuel Tank Capacity | 125 cc |
| Chassis | Aluminum |
| Suspension | Independent |
| Shocks | Oil-filled |
| Radio System | 2.4 GHz |
Explains warning symbols and their meanings for safe operation.
Covers running location, pre-operation checks, post-operation, and fuel safety.
Lists items included in the kit.
Lists items needed but not included with the kit.
Initial setup steps for the RC car, including igniter and battery.
Instructions for installing the receiver antenna correctly.
Safety and maintenance advice for operating the vehicle in wet environments.
Procedure for powering on the R/C unit and checking radio range.
Adjusting steering and throttle trims for neutral operation.
Overview of transmitter functions and controls.
Setting transmitter switches and understanding the fail-safe system.
Procedures for filling the fuel tank and priming the engine.
Steps for starting the engine and basic troubleshooting.
Instructions for the initial engine break-in period.
Adjusting needles for best engine performance and response.
Using engine temperature to guide fuel mixture adjustments.
Detailed tips for carburetor tuning and warnings.
Using temperature, factory settings, and break-in adjustments.
Adjusting the idle speed screw for stable idling.
Adjusting the low speed needle for throttle response.
Methods for safely stopping the engine.
Correct sequence for powering down the transmitter and receiver.
Explanation of glow plugs, their types, and maintenance.
Solutions for common engine starting and running issues.
Troubleshooting car movement and control issues.
Overview of maintenance intervals.
Cleaning and lubricating the chassis.
Cleaning and oiling the air filter.
Cleaning wheels and securing tires.
Assembling and maintaining the clutch.
Servicing the differentials.
Covers assembly of gearbox, suspension, steering, engine, etc.
Assembling and filling shock absorbers.
Mounting wheels and fitting the body shell.
Transmitter controls, indicators, and setup procedures.
Wiring the receiver and adjusting throttle linkage.
Adjusting neutral, full throttle, and full brake settings.
Overview of engine components and storage tips.
Steps for engine disassembly and repair.
Detailed engine overhaul instructions.
Visual breakdown of engine parts and their numbers.
Comprehensive list of all available parts.
List of optional upgrade and accessory parts.
To Next Page