HPM Slimline D810SLIMDP User Manual

C
Program Mode – Setting a Program
(i) In Program Mode use the UP and DOWN
buttons scroll to the program you want to set.
Example: Press the UP button once to scroll
to Program 1 ON setting. The number 1 and
word ON will flash.
(ii) Press OK to enter the Program Setting
Procedure. The day setting will flash.
(iii) Use the UP and DOWN buttons to choose
which days of the week you want the timer to
operate. Day combinations include:
- Daily (Monday – Sunday)
- Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday or Sunday
- Monday – Friday only
- Monday – Saturday only
- Saturday & Sunday only
- Monday – Wednesday only
- Thursday – Saturday only
- Monday, Wednesday and Friday only
- Tuesday, Thursday and Saturday only
The day combinations allow for flexibility in
program settings. You may like to scroll through
the list a few times to get the feel for the
combinations before confirming your setting.
(iv) Press OK to confirm. The hour will flash.
(v) Use the UP and DOWN buttons to choose
what hour you want your device to switch ON.
For example if you want the timer to come
at 5:15pm press the UP button until 17:00
is displayed.
(vi) Press OK to confirm. The minute setting will
flash.
(vii) Use the UP and DOWN buttons to finish
(x), (xi),
(xii), (xiii)
(x), (xi)
UP &
OK
DOWN
(xiii)
(ix)
(ix)
UP
OK
(v), (vii)
(vi), (viii)
UP &
OK
DOWN
(i), (iii)
(ii), (iv)
UP &
OK
DOWN

HPM Slimline D810SLIMDP Specifications

General

Brand	HPM
Model	Slimline D810SLIMDP
Category	Timer
Language	English