HPRT HT800 User Manual

HT800/HT830 User Manual
17
3.4 Detection
When printing paper, the moveable label sensor is used to detect paper. The label sensor moves
differently when using various kinds of paper. If user moves the sensor improperly, paper may not
be detected, therefore the printer could not print paper. The following instructions tell users how to
use label sensor correctly. Please read it carefully.
3.4.1 Continuous Paper
When printing continuous paper (Figure 1), the sensor shall be aimed at the left triangle below
(Figure 2), which is the original position.
Figure 1 (Continuous Paper)

HPRT HT800 Specifications

General

Brand	HPRT
Model	HT800
Category	Barcode Reader
Language	English