HPRT HT800 - Ethernet Network Configuration; Wireless Network Settings; External Device and Barcode Scanner Settings; Printer Testing and Calibration Functions

HT800/HT830 User Manual
86
Parity
None (Default)
Odd
Even
Flow Ctrl
None
XON/XOFF
Hardware (Default)
SW+HW
Ethernet Setup
Switch
OFF
ON
Address Mode
DHCP
Static (Default)
Port Number
Default: 9100
IP Address
Default:10.0.3.22
Default Gateway
Default:10.0.3.1
Subnet Mask
Default:255.255.255.0
Wireless Setup
Bluetooth Switch
OFF (Default)
ON
SPP Pairing Code
Default:0000
WiFi SSID
WiFi Switch
OFF (Default)
ON
Networking Mode
AP Mode (Default)
Station Mode
Ext.Device
Keyboard
None (Default)
USB Host
RS232
Keyboard Language
English (Default)
Spanish
Portuguese
France
German
Ukrainian
Barcode Scanner
None (Default)
USB Host
RS232
Testing
TPH Printed Mileage
Show the mileages
printer has printed
TPH Bad Not Printing Test
Print the testing page
Label Calibration
Calibrate the label