To Next PageTo Next Page
Need help?Do you have a question about the HQ Power PROMIX230DSP and is the answer not in the manual?
Lists various reverb effects with their respective durations, from Hall to Room and Plate types.
Details echo and delay effects, including Voice Doubler, Echo & Room, and Echo & Hall with varied timings.
Encompasses modulation effects like Chorus, Flanger, Tremolo, and Wah, with speed definitions and combinations.
Instructions for turning the mixer on/off and the status indicator light.
Controls for master output level, headphone mix, and headphone volume adjustment.
Covers input selectors, gain, EQ, kill buttons, cue selection, input faders, and crossfader.
Details the auto beat sensor BPM counters for tracking and matching track speeds.
Explains the BPM displays for each channel and the offset indicator for BPM comparison.
Covers microphone input, gain, EQ, and the function switch for talkover.
Details the LCD, assign selector, effect on/off switch, and program selection keys.
Describes phono, CD, line inputs, and unbalanced master outputs (high and low).
Details unbalanced master outputs (low), AC power socket, and earth stud.
Provides detailed technical data for Mic, Phono, CD/Line inputs, equalization, and headphones.
Includes dimensions, weight, and power supply requirements for the mixer.
General| DSP Effects | Yes |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| USB Input | Yes |
| USB | Yes |
| Bluetooth | No |
| EQ | 3-band |
| Power Supply | 230V |
| Input Connectors | XLR, RCA |
| Output Connectors | XLR, RCA, 6.3mm Jack |
