02
1.This is an all-in-one circuit integration board aimed to simplify the mixing of controls.
2.Since the flaps have their own release and return function, it does not need to be set
to the board.
3.The flight correction feature (auto-stabilization) on the throttle and pitch functions has
a mixing ratio within 5 increasing levels. This means the auto-stabilization feature can
be adjusted for the elevator and throttle controls to preferred flying characteristics.
Configuring this feature depends on the desired preference but to setup the suitable
correction ratio, press the mix-control button to set the correction rate. Press the button
once (1 flash) for a 4% correction ratio, two times (2 flashes) for a 6% correction ratio,
three times (3 flashes) for a 8% correction ratio, four times (4 flashes) for a 10%
correction ratio and five times (5 flashes) for a 12% correction ratio.
4.The retract cover controls will not need to be mixed on this board since they have their
own release and return mixing.
To Next Page
Loading...
Need help?
General
