❖ Extend and Retract the Shade Before you setup My Favorite Position:
• Press the DOWN button to Extend the Shade.
• Press the UP button to Retract the Shade.
• Press My Favorite button to Stop.
❖ Extend and Retract the Shade After you setup My Favorite Position:
• Press the DOWN button for 1.5 seconds to continuing Extend the Shade.
• Press the UP button for 1.5 seconds to continuing Retract the Shade.
• Press any button to stop
❖ Operate your shade to My Favorite position:
• After you setup My Favorite position, press UP button to retract shade to top limited position.
• Press My Favorite button for 2 seconds to operate shade to your favorite position.
❖ Press LEFT < or RIGHT > button to select the desired channel (Channel 1 - Channel 15). To control 15
motors/ motorized shades synchronously, move to channel “0” for group control.
❖ Add a duplicated remote control:
• Click P2 once on the existing remote, and wait for shade to “jog”. Click P2 again and wait for
another “jog”.
• Click P2 once on the new adding remote, and wait for shade to “jog”.
❖ Disconnect a duplicated remote to the original existing remote:
• Click P2 once on the remote you want to continue use, and wait for shade to “jog”. Click P2 again
and wait for another “jog”.
• Click P2 button once on the remote you want to remove.
❖ Remove All connected remotes:
• Click P2 button once on one of remotes, and wait for shade to “jog”.
• Click My Favorite button, and then wait shade to “jog”.
• Click P2 button on the same remote again, and then shade will jog.
• All remotes will be disconnected.
15-Channel Remote Operation Guide
Simple Touch 15-Channel Remote
To Next Page
Loading...