18
9. Using the Camera
Taking photos and recording video clips along with audio is easy with your device’s built-in camera.
Launch the camera
• Press the CAMERA button on your device.
• Tap Start > Programs > Camera.
• Tap Start > Programs > Pictures & Videos,
then tap the Camera icon.
To exit the camera, tap the
Exit icon ( ) on the
screen.
Camera screen
Capture a still image
1. After launching the camera, tap or at the upper left side of the screen or press
NAVIGATION left or right to select the Photo capture mode.
2. Press the CAMERA button halfway to activate autofocus ( ).
3. When autofocus is set ( ) press the CAMERA button all the way to take the shot.
Capture a video clip
1. After launching the camera, tap or at the upper left side of the screen or press
NAVIGATION left or right to select the Video capture mode.
2. Press the CAMERA button or the CENTER OK button to start recording a video clip. To stop
recording, press the CAMERA button or the CENTER OK button again.