Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on HTC Desire 628
dual sim, and then turning on the headset.
However, you might have to connect manually if your headset has been used with another Bluetooth
device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 158.
2. Tap the headset’s name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation to
find the passcode.
If you still cannot reconnect to the headset, follow the instructions in Unpairing from a Bluetooth
device on page 159, and then follow the steps under Connecting a Bluetooth headset on page 158.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 158.
2. In the Paired devices section, tap next to the device to unpair.
3. Tap Unpair.
Receiving files using Bluetooth
HTC Desire 628 dual sim lets you receive various files with Bluetooth, including photos, music
tracks, contact info, calendar events, and documents such as PDFs.
Refer to the device’s documentation for instructions on sending information over
Bluetooth.
1. Turn Bluetooth on.
See Turning Bluetooth on or off on page 158.
2. On the sending device, send one or more files to HTC Desire 628 dual sim.
3. If asked, accept the pairing request on HTC Desire 628 dual sim and on the sending device.
You may also be prompted to enter the same passcode or confirm the auto-generated
passcode on both devices.
You'll then get a Bluetooth authorization request.
4. Tap Pair.
5. When HTC Desire 628 dual sim receives a file transfer request notification, slide the
Notifications panel down, tap the incoming file notification, and then tap Accept.
159 Wireless sharing
To Next Page
Loading...
