HTC Hero - Safety Precautions for Power Supply Unit

Quick Start Guide 21
Safety Precautions for Power Supply Unit
Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with
the product. This product should be operated only with the
following designated power supply unit(s):
AC Adapter: HTC, Model TC P300
Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire
and burns if the battery pack is handled improperly. Do
not attempt to open or service the battery pack. Do not
disassemble, crush, puncture, short external contacts or
circuits, dispose of in fire or water, or expose a battery pack to
temperatures higher than 140˚F (60˚C).
Warning Danger of explosion if battery is incorrectly replaced. To reduce risk
of fire or burns, do not disassemble, crush, puncture, short external
contacts, expose to temperature above 140° F (60° C), or dispose of in
fire or water. Replace only with specified batteries. Recycle or dispose
of used batteries according to the local regulations or reference
guide supplied with your product.
Note This product should be operated only with the following designated
Battery Pack: HTC, Model RHOD160
Take extra precautions:
Keep the battery or device dry and away from water or any
liquid as it may cause a short circuit.
Keep metal objects away so they don’t come in contact
with the battery or its connectors as it may lead to short
circuit during operation.
The phone should be only connected to products that bear
the USB-IF logo or have completed the USB-IF compliance
program.
•
•
•
•
•
•
•