HTC Magic - Page 132

132 Getting Connected
To change the phone name
The phone name identifies your phone in a Bluetooth network.
Make sure that you have turned Bluetooth on.
On the Wireless controls screen, touch Bluetooth settings > Device name.
Enter the name for your phone in the dialog box, then touch OK.
To pair and connect a Bluetooth hands-free headset or car kit
You can connect your phone to a Bluetooth hands-free headset or a Bluetooth
car kit and use those devices to send and/or receive calls. Before you can use a
Bluetooth hands-free headset or car kit, you must pair it first with your phone.
Important The phone supports the following Bluetooth profiles: Headset, Handsfree,
A2DP, and AVRCP.
1. Press HOME > MENU, and then touch Settings.
2.
Touch Wireless controls > Bluetooth settings and then select the
Bluetooth check box. Your phone will start to scan for Bluetooth devices
within range and will display all detected devices below the Bluetooth
devices section.
Tips • If you do not find the device in the list, touch Scan for devices to scan again.
• Make sure that the Bluetooth device that you want to pair with is set to
discoverable mode. Consult the Bluetooth device’s documentation to learn how to
set it to discoverable mode.
3. Touch the hands-free headset or car kit in the list to start pairing.
Note For some Bluetooth devices, you need to enter a passcode to pair with the
Bluetooth device. You can try “0000” as the passcode. If that does not work,
consult the Bluetooth device’s documentation.
4. The pairing and connection status will appear below the hands-free headset
or car kit name in the Bluetooth devices list. When the other Bluetooth hands-
free headset or car kit is connected to your phone, the Bluetooth connected
icon will appear in the status bar. You can now start using the hands-free
headset or car kit to make and/or receive phone calls.
1.
2.
3.