HTC One X9 - User Manual

To Next Page

1. With the phone facing

down, open the left slot

cover, and then remove the

nano SIM tray from the

SIM slot.

To remove the nano SIM

tray, insert your fingernail

in the small groove in the

tray and then pull the tray

out.

2. Place your nano SIM card

into the tray with the gold

contacts facing up and the

cut-off corner facing out.

3. Reinsert the tray, and then

close the slot cover. When

reinserting the tray, make

sure the nano SIM card is

facing up so that it doesn’t

fall out.

IMPORTANT:

Use a standard nano SIM only.

Don’t cut a micro SIM or regular SIM card and insert it into the

nano SIM slot. It’s thicker than the standard nano SIM card and

may get stuck in the slot.

Don’t disassemble any part of the phone.

Don’t try to open the phone or remove the battery by force. This

may damage the phone or its electronics and will invalidate the

warranty.

Don’t throw the tray away.

You need it to insert your nano SIM card.

___ Inserting your nano SIM and microSD cards

HTC One X9

Need help?

Do you have a question about the HTC One X9 and is the answer not in the manual?

Summary

Insert SIM and MicroSD Cards

Nano SIM Card Insertion

Open slot cover, remove tray, position nano SIM card correctly, and reinsert tray.

MicroSD Card Insertion

Open slot cover, insert microSD card with contacts facing up until it clicks.

Phone Tips and Support