Quick Start
Phone Basics
Get started
Press and hold the power button on the top panel to
turn the phone on or off.
To lock, briefly press the power button.
To unlock, press the power button, then pull the
lock up.
Ready2Go
AT&T Ready2Go helps you set up your device using
your computer.
• Set up email, contacts, and Wi-Fi.
• Customize your home screen, wallpaper,
ringtones, and more.
When you first turn on the phone, you’ll see the
AT&T Ready2Go wizard.
Tap Get Started. You’ll see a web address and code.
On your computer’s browser, go to the web page.
Enter the code from your phone on the web page.
Complete the steps to send your personalization
options to your phone.
Getting to Know Your Phone
For more information, visit att.com/DeviceSupport
Volume
up
Volume
down
Power
Headphone
jack
Touch
screen
Home
Back
Front
camera
Notification
LED
microSIM
card slot
Charger/
USB port
Notifications
bar
Dual
speakers
NFC
Setting up Your Phone
Insert the microSIM card
To eject the microSIM card tray,
insert a small bent paperclip or
the microSIM eject pin into the
small hole next to the tray.
Pull the microSIM card tray out,
and place the microSIM card into
the tray.
Insert the microSIM card tray
into its slot.
Charge the phone
Connect the USB cable to your
phone.
Plug in the power adapter to
an electrical outlet to start
charging.
Important: Please use the power
adapter and USB cable that came
in the box for optimum battery
performance.
To Next Page
Need help?
General
