8
Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider
under the following conditions:
The product has been damaged by exposure to liquid, dropped, subject to impact or damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow the operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
Exposure to liquids
Do not expose the device to liquids, except as specified in the Waterproof Attributes section on Safety and
regulatory guide and Quick Start Guide.
Avoid using your device after a dramatic change in temperature
When you move your device between environments with very different temperature and/or humidity ranges,
condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the
moisture to evaporate before using the device.
NOTICE: When taking the device from low-temperature conditions into a warmer environment or from
high-temperature conditions into a cooler environment, allow the device to acclimate to room temperature before
turning on power.
To Next Page
Loading...