SET UP YOUR RE FOR THE FIRST TIME
Connect your RE to a
power source using the
supplied micro USB
cable.
The indicator LED
turns green when RE is
fully charged.
CHARGE THE
BATTERY
STORAGE CARD
POWER ON
1. Open the microSD card slot
cover located at the bottom of
your RE.
2. Insert the microSD card with the
gold-plated side facing the same
direction as the lens. The card
will make a slight clicking sound
when it’s securely inserted.
3. Close the slot cover by pressing
down to lock it in place.
Press and hold the
shutter button for two
seconds to power on for
the first time.
For subsequent use,
simply hold your RE by
the grip sensor and it
will instantly power on.
IMPORTANT! RE will not operate without a
microSD card. Please be sure to securely close the
slot cover to prevent damage from water and dust.
Confirm that there is a microSD card
inserted in your RE.
To Next Page
Loading...