HTC Shadow - Page 163

Getting Connected 163
To change the HotSpot Utility settings
The HotSpot Utility automates the login process when you are in a T-Mobile
HotSpot.
1. Select
Start > Wi-Fi > HotSpot Settings.
2. Select
Menu > Advanced Settings.
3. Select or clear the options you want.
• Skip ‘login/cancel/sign up’ request: If not
selected, the HotSpot Found screen will be
displayed first for you to log in (if Username
and Password are not correctly filled in). If
you want to get a T-Mobile HotSpot account,
select Sign up for T-Mobile HotSpot service.
• Automatic login: If not selected, you will
be prompted to type in your username and
password whenever you turn on Wi-Fi and try
to connect to T-Mobile HotSpot.
• Automatic logoff: If not selected, a message will always display first to
confirm whether you want to log off from the T-Mobile HotSpot service.
• Disable HotSpot Login Utility: If selected, you will not be prompted to
connect when you are in a T-Mobile HotSpot location. To connect, clear
this check box.
4. Select
OK.
To reset HotSpot Utility settings
1. Select Start > Wi-Fi > HotSpot Settings.
2. Select
Menu > Reset All.
Note The Username and Password fields will also be cleared.