Experiencing Multimedia 131
To beam pictures
You can beam a picture to your friends or family by using infrared
technology.
1. On the Home screen, click Start > Pictures & Videos.
2. Select the picture you want to beam.
3. Click Menu > Beam.
4. Select the device to which you want to send the picture.
5. Click Beam.
To assign pictures to contacts
You can assign a picture to a contact so that you can easily identify the
contact at any time.
1. On the Home screen, click Start > Pictures & Videos.
2. Select the picture you want to assign to a contact.
3. Click Menu > Save to Contact.
4. Select the contact, and click Select.
To customize picture options
1. On the Home screen, click Start > Pictures & Videos.
2. Select the picture for which you want to configure advanced options.
3. Click Menu > Options.
4. Select General or Slide Show on the Options screen then press
ENTER.
Selecting General
on the Options screen allows you to do the
following:
• Decrease the picture size so that photos can be sent faster via
e-mail.
• Set the direction to rotate a picture.
Selecting Slide Show on the Options screen allows you to do the
following:
• Configure the view settings during slide shows.
• Activate screensaver.
To Next Page
Loading...
