84 Getting Connected
3. Click Menu > New to search for a new device.
Your phone searches for other Bluetooth-enabled devices and lists
them.
4. Select the desired device name in the list.
5. Click Next.
6. Enter a passkey (1 up to 16 characters) to establish a secure
connection, then click Next.
7. Wait for the paired device to accept the partnership:
• If you are creating a Bluetooth partnership between your phone
and another Bluetooth-enabled Pocket PC or phone, the receiving
party needs to enter the same passkey that you specified.
• If you are creating a Bluetooth partnership between your phone
and computer, a balloon message will appear at the bottom-right
of the computer screen, prompting your computer to accept the
partnership. Click the message then enter the passkey.
8. On your phone, a message will appear, indicating that your phone has
connected with the paired device. Click OK.
9. The name of the paired device is then displayed. You may edit and
enter a new name for that device, then click Next
.
10. Select the check boxes of services that you want to use from the
paired device. Click Done.
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in discoverable mode.
2. Click Yes when prompted to establish a partnership with the other
device.
3. Enter a passkey (the same passkey that is entered on the device
requesting the partnership) to establish a secure connection.
The passkey must be between 1 and 16 characters.
4. Click Next.
5. A message will appear, indicating that your phone has connected
with the paired device. Click OK.
To Next Page
