90 Getting Connected
14. To use your phone as a GPRS modem, set the Access point name
(APN). To set, click Menu > APN Setting and enter the access point
name.
15. On your notebook, disable ActiveSync.
Note To disable ActiveSync on your computer, click File > Connection Settings
then clear Allow connections to one of the following.
16. Click Menu > Start on your phone.
After successfully connecting your phone to the computer via Bluetooth,
the next thing to do is to add your phone as a Bluetooth modem to your
computer.
To add the phone as a Bluetooth modem
1. On the computer, click Start > Control Panel > Phone and Modem
Options.
2. Click the Modems tab. Check if there is a Bluetooth modem, “Generic
Bluetooth Modem” or “Standard Modem over Bluetooth Link”, listed. If
there is, skip to step 6.
3. If there is no Bluetooth modem listed in the Modems tab, click Add.
4. In the Add Hardware Wizard, click Next.
5. In the Select Bluetooth Device screen, select the phone name then
click OK.
6. In the Modems tab, select the Bluetooth modem listed then click
Properties.
7. Click the Advanced tab, then in the Extra initialization commands
text box, enter:
AT+CGDCONT=1,”IP”,”APN”
where APN is the access point name provided by your mobile
network operator to give you access to the Internet. Then click OK.
8. Click OK to exit the Phone and Modem Options.
Your phone is now set up as a Bluetooth modem. For details about how to
connect to the Internet, see “Dial-up and connect to the Internet” in this
chapter.
To Next Page
Loading...
