6 Quick Start Guide
5
Insert the microSD card
From the side of the
phone, open the microSD
slot cover.
Insert the microSD card
into the slot with its gold
contacts facing down
until it clicks into place.
Close the microSD slot
cover.
1.
2.
3.
Put the battery back in
Align the battery’s
exposed copper
contacts with the battery
connectors inside the
battery compartment.
Insert the contact side
of the battery first then
gently push the battery
into place.
1.
2.
IMPORTANT
Before you reinstall the battery,
remove the thin film that covers
the battery.
4
Replace the back cover
Secure the bottom part
of the back cover first
by aligning into the two
openings located at the
bottom part of the back
of the phone.
Press the sides and the
top part of the back cover
down to lock the cover
into place. You will hear a
click when the back cover
is locked in place.
1.
2.
6
To Next Page
Loading...
Need help?
General
