HTC Thunderbolt 4G User Manual

•
•
•
•
http://www.fixez.com/
Page 1 of 9
TTT-9007 Small Phillips Screwdriver
TTT-9010 Plastic Opening Tools
TTT-9013 Spudger
Heat Gun / Blow Dryer
HTC Thunderbolt 4G - Disassemble Guide
5HTXLUHG7RROV
This guide will show you how to disassemble the HTC Thunderbolt 4G, assisting in making
the repair of the device both simple and inexpensive. Following the steps we have provided
should help you quickly, and safely, replace not only a broken display, but also any other
internal components that may have become damaged.
You can find a full archive of fixez.com disassemble guides and videos, for numerous makes
and models of phones and tablets, by visiting http://www.fixez.com.

HTC Thunderbolt 4G Specifications

General

Brand	HTC
Model	Thunderbolt 4G
Category	Cell Phone
Language	English

Summary

Initial Device Access and External Components

Step 1 - Battery Removal

Remove the back cover by prying the notch in the front cover with a plastic opening tool.

Step 2 - Battery Extraction

Lift and remove the battery from the HTC Thunderbolt 4G using a plastic opening tool.

Step 3 - SIM and MicroSD Card Removal

Remove SIM and MicroSD cards, then six Phillips screws securing the rear case.

Internal Component Disassembly

Step 10 - Bottom Ribbon Cable Release

Step 11 - Motherboard and Display Separation

Open the motherboard and display assembly like a book, noting two securing ribbon cables.

Step 12 - LCD and Touch Screen Cable Release

Lift the locks on sockets and release the LCD & touch screen ribbon cables.

Step 14 - Front-Facing Camera Removal

Step 15 - Rear-Facing Camera Removal

Step 18 - Touch Screen Adhesive Heating

Step 19 - Touch Screen Separation

Step 20 - LCD Removal

Gently pry the LCD from the display assembly's frame, being careful due to fragility.

Step 21 - LCD and Touch Screen Ribbon Separation