Unpairing from a Bluetooth device
You can make HTC Velocity 4G forget its pairing connection with another Bluetooth
device. Doing so may require you to enter or confirm a passcode again if you want to
reconnect to the other device.
1. From the Home screen, press , and then tap Settings > Wireless & networks.
2. Tap Bluetooth settings.
3. In the Bluetooth devices section, press and hold the device to unpair.
4. Do one of the following:
§ If HTC Velocity 4G is connected to the Bluetooth device, tap Disconnect &
unpair.
§ If HTC Velocity 4G is disconnected from the Bluetooth device, tap Unpair.
Sending information using Bluetooth
You can use Bluetooth to send information from HTC Velocity 4G to another
Bluetooth enabled device such as a phone or notebook computer. You can send the
following types of information, depending on the device you are sending to:
§ Images and videos
§ Calendar events
§ Contacts
§ Audio files
Before you begin, set the receiving device to discoverable mode. You may also
need to set it to “Receive Beams” or “Receive Files”. Refer to the device’s
documentation for instructions on receiving information over Bluetooth.
1. On HTC Velocity 4G, open the app that contains the information or file you want
to send.
2. Follow the steps for the type of item you want to send:
Captured photo or
video
After capturing, on the Camera preview screen, tap ,
and then tap Bluetooth.
Photos or videos 1. On the Gallery app, choose an album.
2. Tap > Bluetooth.
3. Choose the photos and videos you want to share, and
then tap Next.
203 Bluetooth
To Next Page
Loading...
