Use Case 3: Track moving objects by wireless interface in VR. In this case, the dongle is used
to transfer tracking data from the VIVE Tracker (3.0) to a PC.
Use Case 4: Track moving objects using a wireless interface in VR, with the accessory
passing data to a PC through USB, BT/Wi-Fi or propriety RF. This is similar to Use Case 3 but
the accessory directly transfer the tracking data to/from a PC for a specific purpose based on
its design.
Use Case 5: Track moving objects using a wireless interface in VR, with the accessory
simulating buttons of the VIVE Controller or passing data to a PC through the VIVE Tracker
(3.0). This is similar to Use Case 3 but the accessory connects with the VIVE Tracker (3.0) to
transfer a button event to a PC through the Pogo pins or USB interface.
To Next Page
Loading...