HTC VIVE Tracker 3.0 - Attaching VIVE Tracker 3.0 to Accessories; Turning VIVE Tracker 3.0 On or Off

VIVE Tracker (3.0)
HTC Corporation
Developer Guidelines
V1.0
12/16/2020
3 HTC Confidential and Proprietary
This section describes hardware requirements for accessories used with the VIVE Tracker
(3.0) in order to enable positional tracking and input of specific data for the HTC VIVE VR
system.
A compatible accessory can be attached to the VIVE Tracker (3.0) to send specific data to a
PC through the USB interface of the VIVE Tracker (3.0). The VIVE Tracker (3.0) needs to be
paired with the dongle first to be able to transfer an event to a PC. The figure below describes
the conceptual architecture.
USB 2.0 full speed (client) from USB Type-C connector.
GPIO Pin Absolute Maximum Rating
Symbol
Parameter
Min
Max
Unit
V
I
Input voltage
- 0.3
3.6
V
V
ESD
Electrostatic discharge voltage , Human Body Model
--
4000
V
Accessor
y
VIVE
Tracker
Dongle
PC
USB
USB
Wireless