HTC VIVE Tracker 3.0 - Charging VIVE Tracker 3.0

1 Sensors
2 USB port
3 Pogo pin port
4 Friction pad
5 Standard camera mount
6 Stabilizing pin recess
7 Status light
8 Power button
Charging VIVE Tracker (3.0)
Charge VIVE Tracker (3.0) using the USB Type-C cable that came in the box.
Connect one end of the USB Type-C cable to VIVE Tracker (3.0) and the other end to your
computer.
When VIVE Tracker (3.0) is fully charged, its status light either shows white when off or green
when on.
You can also use an HTC power adapter with the USB Type-C cable to charge VIVE Tracker
(3.0).
5 VIVE Tracker (3.0)