EasyManua.ls Logo

htech WG5400 - Electrical Connection

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 7
In the absence of earthing
installation, an authorised
electrician should carry out an
earthing installation. In the case of use
without earthing installed, we will not be
responsible for any loss of use that may
occur.
The plug on this appliance may
incorporate 13A fuse depending on
the target country. (For Example UK,
Saudi Arabia)
2.4. Electrical connection
WARNING: Your machine is set to
operate at 220-240 V. If the mains voltage
supply to your machine is 110 V, connect a
transformer of 110/220 V and 3000 W
between the electrical connection.
Connect the product to a
grounded outlet protected by a fuse
complying with the values in the
"Technical Specifications" table".
The earthed plug of the
machine must be connected
to an earthed outlet supplied by
suitable voltage and current.
BUILT-IN DISHWASHER INSTALLATION FOR
COLUMN CABINET TYPE WHICH INCLU-DES
THE ANTI-SIFONAGE FEATURE.
1. Integrated dishwasher assembly have to
suitable to user manuel and installation guide.
2. The height of assembly point (foot surface of
dishwasher in column cabinet) must not be higher
than 500 mm.
3. Dishwasher weight should be considerated.
Material selection and design should be made
accordingly.
4. Electrical devices have not to use in the
drawer / compartment / space under the dis-
hwasher.
5. The surface on which the dishwasher feet are
seated must be rough. Surface may cau-se
problems while the using of dishwasher.