WATER LEVEL SWITCH
WPS 1000
Art.-No. 1 11 44 20
THE WATER LEVEL SWITCH WPS 1000 can be used
for the automatic control of conducting liquid levels. In various
technical containers (e.g., tanks, wells, cellars, etc.), it is
necessary to monitor a liquid level or an external penetration of
water automatically. If water leaks in or reaches a specified level,
a relay is switched. This trigger can then activate attached
pumps, valves, or warning devices. Installation is very easy – all
connections are fitted with plugs and immediately ready for use.
FEATURES
– Switching point selectable at different water levels.
– The Output Socket can be configured as “Opener” or “Closer”
– The possibility of remote sensoring up to 20 meters by two-wire cable
– Useable for all storage containers made of concrete, plastic, or metal
– Maintenance free function. Monitoring is not needed
– Very simple and fast installation
– LED display for “mains” (Netz) and “relay ON” (Rel. Ein)
12 | Features
To Next Page
Loading...
