2.Operation with Wire Remote Controller
1.Press MODE button to select operation mode:“”
A
cooling mode
dehumidification mode
fan mode
heating mode
auto-run mode
(This mode is invalid for
high-energy efficiency s .
18k,24k DC Inverter Unitary air-conditioners
except type )
2. Press ON/OFF button to turn on or turn off the unit
3. Press TEMP. SETTING button to set room temperature. The temperature
range can be set from 18℃ to 32℃。
4. Press FAN button to set fan speed you want. Of course you can set auto fan and indoor
unit will automatic select fan speed according to the difference between room temperature and
setting temperature
“”
“”“”
“”
5. You may turn off the unit by press ON/OFF button again
Note:In fan mode, temperature setting is invalid.
“”
2.1 mode function
Wire Remote Controller
7
To Next Page
Loading...
