2.2 sleep function
ROOM TEMP
C
Press timer/sleep button once to active sleep function. And sleep
sign“ ”will appear on LCD.
Press timer/sleep button again to cancel sleep function, and sleep
sign on LCD will disappear.
Note:
During fan mode, the sleep function is invalid.
auto mode,
IF the air conditioner is on, press the“ ”for
seconds,“trickle”a sound, Then the flap begin swing.
IF you need stop swing,press the“ ”for two seconds
again,and the flap stop swing.
two
2.3 Timer function
2.4 Flap setting
ROOM TEMP
C
TIMER OFF
TIMER OFF mode
1 you can set timer off when indoor unit is running. By press
TIMER/SLEEP button for 3 seconds, timer clock appear on
LCD, and “TIMER OFF”flag will twinkle.
2 you can adjust the time after which the indoor unit would turn
off automatically by press “ ”“ ” button. The time can
be set from 0.5 to 24(or 12) hour in 30 minutes steps.
3 when you have set the time, press TIMER/SLEEP button for
3 seconds again
“TIMER OFF”flag will
4 IF you need cancel “TIMER OFF”,press TIMER/SLEEP
button for 3 seconds to active the timer, Press “ ”“ ”
button set time 00:00,Cancel “TIMER OFF”after five
seconds automatically.
or wait for 5 seconds to active the timer,
stop twinkle, and timer begin to work.
ROOM TEMP
ROOM TEMP
C
C
TIMER ON
TIMER ON
TIMER ON mode
1 you can set timer on when indoor unit is shut off, By press
TIMER/SLEEP button for 3 seconds, timer clock appear on
LCD, and “TIMER ON” flag will twinkle.
2 you can adjust the time after which the indoor unit would turn
on automatically by press “ ”“ ” button. The time
can be set from 0.5 to 24(or 12) hour in 30 minutes steps.
3 when you have set the time, press TIMER/SLEEP button
for 3 seconds again to active the timer,
“TIMER ON” flag will stop twinkle, and timer begin to work.
4 IF you need cancel “TIMER ON”,press TIMER/SLEEP
button for 3 seconds to active the timer, Press “ ”“ ”
button set time 00:00,Cancel “TIMER ON”after five
seconds automatically.
or wait for 5 seconds
Timer clock
Wire Remote Controller
8
To Next Page
Loading...
