Need help?Do you have a question about the HUALIAN HP-241G and is the answer not in the manual?
Adjust ribbon tension to prevent looseness or excessive drag for optimal printing.
Adjust ribbon reel damping force to keep ribbon moderately tight during operation.
Guide for replacing ribbon, ensuring correct ink side contact and alignment.
Adjust ribbon roller end-plates to be 1mm wider than ribbon width.
Adjust connection pole length for correct type height relative to printed object.
Adjust ribbon feed distance to ensure clear printing without excessive consumption.
Rotate knob to adjust temperature for optimal ribbon printing based on material.
Steps for safely removing and replacing type in the print head.
Guidance on starting coding and adjusting for single sheet printing.
Advice on regularly cleaning feed and press wheels with alcohol or ether.
To Next Page
General