Huawei AP Series User Manual

13
Installing the AP
The procedure for installing the AP6610DN-AGN against a horizontal pole is similar to the procedure
for installing the AP6610DN-AGN against a vertical pole.
(4) Pinch the wall-mounting bracket on the
expansion bolts, and fasten the flat washer, spring
washer, and nuts in order.
(5) Slide the AP into the wall-mounting bracket
and fasten the screw on the wall-mounting
bracket.
 Against the vertical pole
(1) Determine the AP installation position, slide the
hose clamp through the hole of the wall-mounting
bracket and attach it to the pole, and use the hex
key to secure screws on the hose clamp.
(2) Slide the AP into the wall-mounting bracket and
fasten the screw on the wall-mounting bracket.
1
2
2
 Against the horizontal pole
NOTE
Screw

Huawei AP Series Specifications

General

Category	Wireless Access Point
Model	AP Series
Wireless Standards	IEEE 802.11a/b/g/n/ac/ax
Frequency Bands	2.4 GHz, 5 GHz
MIMO Technology	MU-MIMO
Security Features	WPA3, WPA2, WPA, WEP
Management	Web-based management
PoE Support	802.3af/at
Ethernet Ports	1 or more Gigabit Ethernet ports
Antenna Type	Internal or External antennas (depending on the model)
Humidity	5% to 95% non-condensing
Dimensions	Varies depending on the model
Weight	Varies by model
Mounting	Wall, ceiling, pole