Huawei AP Series User Manual

8
Installation Preparations
1. Safety Precautions
2. Installation Environment Check
Before installation, verify that the device runs in a favorable environment.
The table lists requirements on the environment that a device works in, including the temperature,
humidity, altitude, and pressure.
Table 5 Requirements on the environment
Only the qualified personnel are permitted to install and remove the device and its accessories.
Before installation and operation, read the safety precautions carefully.
 Take proper measures to prevent injuries and device damage.
 Place the device in a dry and flat position away from any liquid and prevent the device from
slipping.
 Keep the device clean.
 Do not put the device and tools in the aisles.
Item
Range
Operating temperature
AP6510DN-AGN: -40℃～60℃
AP6610DN-AGN: -40℃～60℃
Storage temperature
AP6510DN-AGN: -40℃～70℃
AP6610DN-AGN: -40℃～70℃
Relative humidity
0% to 100%
Altitude
-60 m to +4000 m
Pressure
70 kPa to 106 kPa
WARNING

Huawei AP Series Specifications

General

Category	Wireless Access Point
Model	AP Series
Wireless Standards	IEEE 802.11a/b/g/n/ac/ax
Frequency Bands	2.4 GHz, 5 GHz
MIMO Technology	MU-MIMO
Security Features	WPA3, WPA2, WPA, WEP
Management	Web-based management
PoE Support	802.3af/at
Ethernet Ports	1 or more Gigabit Ethernet ports
Antenna Type	Internal or External antennas (depending on the model)
Humidity	5% to 95% non-condensing
Dimensions	Varies depending on the model
Weight	Varies by model
Mounting	Wall, ceiling, pole