Huawei AP Series User Manual

Step 4 Run the telnet 192.168.0.1 command to log in to the AP.
Step 5 Enter the default user name and password admin. If the user view is displayed, you have
logged in successfully.
24
Logging In to the AP
 If you logged in to the AP from an AC or a switch, press Ctrl+T to return to the AC or switch view.
This operation does not affect the AP operation.
 If you logged in to the AP from a PC, directly close the Telnet window. This operation does not
affect the AP operation.
Run the exit command to exit from the Telnet window. When the system fails to exit from the Telnet
window:
NOTE

Huawei AP Series Specifications

General

Category	Wireless Access Point
Model	AP Series
Wireless Standards	IEEE 802.11a/b/g/n/ac/ax
Frequency Bands	2.4 GHz, 5 GHz
MIMO Technology	MU-MIMO
Security Features	WPA3, WPA2, WPA, WEP
Management	Web-based management
PoE Support	802.3af/at
Ethernet Ports	1 or more Gigabit Ethernet ports
Antenna Type	Internal or External antennas (depending on the model)
Humidity	5% to 95% non-condensing
Dimensions	Varies depending on the model
Weight	Varies by model
Mounting	Wall, ceiling, pole