Huawei AR200 series - Page 221

[Router-Ethernet0/0/0] port hybrid untagged vlan 100
[Router-Ethernet0/0/0] quit
Step 3 Configure a destination server.
[Router] interface vlanif 100
[Router-Vlanif100] ip address 10.110.1.1 16
[Router-Vlanif100] udp-helper server 10.2.1.1
[Router-Vlanif100] quit
[Router] quit
Step 4 Verify the configuration.
The destination server configured on VLANIF 100 is the NetBIOS-NS name server.
<Router> display udp-helper server
Server-interface Server-Ip packet-num
Vlanif100 10.2.1.1 0
----End
Configuration Files
Configuration file of the Router
#
sysname Router
#
udp-helper enable
#
vlan batch 100
#
interface Ethernet0/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface Vlanif100
ip address 10.110.1.1 255.255.0.0
udp-helper server 10.2.1.1
#
return
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 9 UDP Helper Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
209