Click Next to access the Configure the LAN page.
Step 3 Set LAN access parameters.
NOTE
By default, Layer 2 Ethernet interfaces of the AR150 or AR200 join VLAN 1 and the IP address of VLANIF
1 is 192.168.1.1/24.
Click Next to access the Finish Configuration Wizard page.
Step 4 Confirm the configurations.
View the configurations on the Finish Configuration Wizard page. To confirm the
configurations, click Finish. To modify the configurations, click Previous. If you quit the wizard
without clicking Finish, the configurations will not take effect.
----End
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 4 Connecting to the Internet
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
To Next Page
Loading...
