5. Select Enabled and click OK. Then you can manage SAE boards through the remote
desktop.
Figure 7-9 Remote Desktop (TCP-In) Properties
l Enable the Telnet service.
NOTE
By default, the Telnet service is not installed on Windows Server 2008 R2. To install the Telnet
service, in Server Manager > Features, click Add Features and use Add Features Wizard to
install Telnet Server and Telnet Client.
The Telnet Server rule in the inbound rule list of Windows Firewall with Advanced Security is
automatically enabled when the Telnet server is installed.
1. Choose Start > Administrative > Server Manager. In the left navigation tree that
is displayed, choose Configuration > Services, and double-click Telnet in the right
list.
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 7 Managing the SAE Board
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
44
To Next Page
Loading...
