Huawei AR530 Series - Page 126

Figure 3-28 AR503EDGW-Lc3 appearance
12 13
LTE1
6
2
3
15
8
7 9 10 11
/BDS
1: -
2
3: +
4: NC
2
100-110 V;1 A
: NC
2.4G 5G
AR503EDGW-Lc3
LTE0
4
1
GPS/BDS antenna interface 2 LTE1 antenna interface
3 LTE0 antenna interface 4 Three Wi-Fi antenna interfaces (2.4
GHz)
5 Three Wi-Fi antenna interfaces (5.0
GHz)
6 Power input jack
NOTE
Use a DC power cable to connect the router
to an external power source.
7 LAN interfaces: four GE electrical
interfaces
NOTE
l LAN interfaces GE0 to GE3 can be
configured as WAN interfaces.
l GE0 is a management interface and is
used to upgrade the router.
8 USB interface (host)
9 RST button
NOTE
This button is used to reset the router.
l To restore the factory settings, hold down
the button for at least 5 seconds.
l To reset the system, press the button.
Resetting the router will interrupt services.
Exercise caution when deciding to press this
button.
10 CONSOLE interface
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 197