Sharing data
57
PTP mode
The Picture Transfer Protocol (PTP) is another method to transfer pictures and
videos to your computer.
1. Use a USB cable to connect your phone to the computer.
2. On the
USB computer connection
screen, choose
Camera (PTP)
.
The phone driver is then automatically installed on the computer.
3. After the driver is installed, follow the onscreen instructions on the computer
to view or transfer files.
Mass storage mode
In mass storage mode, you can use your phone as a USB mass storage device and
transfer files between your phone and a computer.
1. Use a USB cable to connect your phone to the computer.
2. On the
USB computer connection
screen, choose
USB storage
device
.
The phone driver is then automatically installed on the computer.
3. The computer will identify your phone as a USB mass storage device. You can
then transfer files between your phone and the computer.
After file transmission, safely remove the device from the computer and
disconnect it from the USB cable to prevent your data from being lost or
corrupted.
To Next Page
Loading...
