Huawei B818-263 - Page 12

HUAWEI B818-263 LTE CPE
Product Description
2 Technical Specifications
Issue02 (2019-10-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Item
Description
LED Indicators

Three signal strength indicators (Green)
More indicators mean better reception.

One power indicator (Green)
Off: Power off.
On: Power on.

One Status indicator(Green)
Off: Data server connection is disconnected.
Flash: Firmware update.
On: Data server connection is connected.

One LAN indicator (Green)
Off: No device is connected to a LAN port.
Flash: Data is being transmitted through a LAN port.
On: At least one of the LAN ports is connected to a device.

One Wi-Fi/WPS/Hi indicator (Green)
On: Wi-Fi is enabled.
Flash slowly: A pairable HiLink device is detected
Flash quickly: HiLink pairing is in progress/WPS connection is in progress.
Off: Wi-Fi is disabled.
 The indicator starts to flash slowly only when B818-263 detects a new
HiLink device.
 HiLink devices include Honor routers, Honor set-up boxes, Honor
handsets/ HUAWEI handsets (EMUI 5.0 and later), and more.

One MODE indicator
Cyan: LTE network accessed
Blue: UMTS network accessed
Green: Ethernet network accessed
Red: No SIM card is inserted or detected, or the SIM card has insufficient
balance
Buttons

One Power ON/OFF switch

One WPS/Hi button
The Wi-Fi indicator flashes slowly when the router detects a HiLink device.
Press the WPS/Hi button to connect the HiLink device to the router's Wi-Fi.
When the Wi-Fi indicator is steady on, press the WPS/Hi button to enable
WPS.

One Reset button
Maximum
transmit power
LTE
B1/3/5/7/8/20/28/32/38/40(2300~2390MHz)/41/42/43: 22.5
dBm+3.2/-2.2 dB
UMTS
B1/5/8: 22.5 dBm+3.2/-2.2 dB
Wi-Fi
2.4GHz
802.11b
SISO Ant0/Ant1 12 dBm(±1.5dB)