Huawei B818-263 - Multi-APN; 5 Ghz Preferred; Hilink

HUAWEI B818-263 LTE CPE
Product Description
3 Services and Applications
Issue02 (2019-10-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
SGW PGW
MME
IPv6 bear
PLAT
V6
V6
V4
Internet IPv6
Internet IPv4
LTE
UE
IPv6
only
device
IPv4
only
device
CLAT
CPE
When the IPv6 only (CLAT) function is enabled, NAT-based functions (like DMZ/Port
Forwarding/Port tigger) cannot be used.
When an IPv4 device accesses the Internet, the performance is degraded because packets need
to be packetized and unpacked. However, IPv6 devices are not affected.
3.8 Multi-APN
The B818-263 supports the establishment and maintenance of three APNs. These three APN
connections isolate data, voice, and remote management services on an operator's network.
The B818-263 supports an independent APN for CPE internal/VoIP/TR-069.
3.9 5GHz Preferred
Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band when signal strength is equal to
increase connection speeds.
3.10 HiLink

Supports HiLink routers to connect to B818-263 through the WPS/Hi button to create an
expanded network.

Supports quick connection between a HiLink device (such as Honor set-up boxes, Honor
handsets and HUAWEI handsets running on EMUI 5.0 and later) and B818-263 through
the WPS/Hi button.