Connect Your Tablet and Phone
Only certain phones support this feature.
Connect your phone and tablet and enable Multi-Screen Collaboration using one of the
following methods (depending on your device model):
Connect over Bluetooth:
1 Swipe down from the upper right edge of your tablet to display Control Panel, touch
to expand the shortcut switch panel (depending on your device model), and enable Multi-
Screen Collaboration.
2 Swipe down from the upper right edge of the phone to display Control Panel, and enable
Bluetooth.
3 Hold your phone close to your tablet and follow the onscreen instructions to establish a
connection.
Scan a QR code to connect:
1 Open Multi-Screen Collaboration on your tablet, and touch Scan to connect on the
Multi-Screen Collaboration screen.
2 Ensure that your phone is connected to the Internet and connect your phone and tablet as
prompted.
Connect by tapping against an NFC-capable keyboard:
You can tap your phone against the standard NFC-capable keyboard that comes with your
tablet to enable Multi-screen Collaboration.
1 Make sure that your tablet has been paired with the keyboard.
2 Swipe down from the upper right edge of your phone to display Control Panel, touch
to expand the shortcut switch panel (depending on your device model), and enable NFC.
3 Tap the NFC area at the back of your phone (near the rear cameras) against the NFC area
of the keyboard until your phone vibrates or plays a tone.
4 Follow the onscreen instructions on your phone and tablet to complete the connection.
Connect via Super Device:
1 Enable Bluetooth and Wi-Fi and log in to the HUAWEI ID on your phone.
2 Swipe down from the upper right edge of the tablet to display Control Panel, and enable
Wi-Fi and Bluetooth.
If you have not logged in to your HUAWEI ID on your tablet or you are not using the
same HUAWEI ID, go to Settings > Super Device > This device > Visible to, and
selectAll nearby devices.
3 Swipe down from the upper right edge of the phone to display Control Panel, and touch
in Super Device to search for nearby available devices or touch > to bind a
new device.
Smart Features
46
To Next Page
Loading...
