14
z Note: Press and hold until is off, the WiFi is disabled.
Establishing the WPS Connection
If the WiFi Clients connected with the E5 support the WPS, the E5 can
automatically generate a network key without manually entering. The
operation steps of WPS connection are as follows.
1. Power on the E5.
2. Start the Clients connected with the E5.
3. Enable the WPS of the E5.
Note: After the WiFi is enabled, press and hold
. When is off,
and then
is displayed on the screen, the WPS of the E5 is enabled.
4. Enable the WPS of the Clients.
Note: For the WiFi operations of the Clients see the Clients’ user guide.
Validating the PIN Code
To Next Page
Loading...
