21
11. Check that the network adapter of your Client runs properly.
12. If the problem still persists, please consult you network operator.
What can I do if the Client cannot access the WLAN?
13. If there are interferences or shields near the Mobile Wi-Fi, you can adjust the position
of the Mobile Wi-Fi.
14. Check and record the following settings of your Client and your Mobile Wi-Fi: SSID,
WEP type, and key. The SSID of the Client must be ANY or the same as that of the
Mobile Wi-Fi. The WEP type and key of the Client must be the same as that of the
Mobile Wi-Fi. Otherwise, you need to change the settings.
15. Check whether the WLAN MAC filter function is enabled on the Mobile Wi-Fi. If the
function is enabled, ensure that all relevant parameters are set correctly. See WLAN
MAC Filter on the web management page for more information.