Figure 3-2 Multi-device access via Wi-Fi and USB at the same time
3.1.2 USB Modem
After you connect the E5372 and PC with a USB data cable, the E5372 driver is
installed on the PC automatically and the shortcut of the WEB page is displayed on
the PC desktops. You can directly use the default settings (or configure APN on the
E5372 WEB page) and set up a network connection. Then you can send or receive
E-mail, access the network through wireless connection, and download files through
wireless data channels.
Figure 3-3 One-device access via USB
3.1.3 LTE/3G/Wi-Fi Auto Offload
The E5372 allows you to access the Internet via LTE/3G or Wi-Fi. When you are using
the E5372 in areas with a Wi-Fi hotspot, for example, an airport, a cafe, a hotel, or
your home, the E5372 switches to Wi-Fi connection automatically, saving your
LTE/3G network traffic fees.
To Next Page
Loading...
