Functioning as a USB Modem
After you connect the E5770s-320 and PC with a USB data cable, the Web page is
displayed on the PC desktops automatically. You can directly use the default settings
(or configure APN on the E5770s-320 Web page) and set up a network connection.
Then you can send or receive E-mail, access the network through wireless connection,
and download files through wireless data channels.
Figure 3-2 Connecting a single device through USB
Providing Network Connection Using the Ethernet Port
After you connect the E5770s-320 to a PC using a network cable to support automatic
identification of the WAN/LAN port in access mode, you can configure the APN on the
E5770s-320's Web page or use the default APN settings, and set up a network
connection. You can then send or receive emails, browse Web pages, and download
files from the PC using the E5770s-320's data connection.
Figure 3-3 Connecting a single device through Ethernet port
To Next Page
Loading...
