Huawei EchoLife EG8145V5 User Manual

NO TE
● The ber connector connected to the optical port on the wall varies depending on
actual conditions.
● To ensure normal use of bers, make sure that the ber bending radius is larger than 30
mm.
No. Item Description
1 Optical
port
The optical port is equipped with a rubber plug and
connected to a ber for upstream transmission.
The type of the optical connector connected to the optical
port can be SC/APC.
2 On/O Powers the ONT on or o.
3 Power Connects to a power adapter.
4 USB Connects to USB storage devices.
5 TEL Connects to the port on a telephone or fax machine.
6 LAN1-
LAN4
Connects to PCs or IP set-top boxes (STBs).
7 WLAN Used to enable or disable the WLAN function
● When the WLAN is disabled, press the WLAN button (>
3s) and release the button to enable the WLAN.
● When the WLAN is enabled, press the WLAN button (>
3s) and release the button to disable the WLAN.
8 WPS When the WLAN is on, press the WPS button (> 3s) and
release the button to start Wi-Fi protected setup (WPS)
negotiation.
9 Reset Press the button for a short time to reset the device; or
press the button for a long time (longer than 10s) to
restore the device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a
reset, contact your Internet service provider.
EchoLife EG8145V5
Quick Start for QR code 2 Connecting Cables
Issue 02 (2023-07-17) Copyright © Huawei Technologies Co., Ltd. 5

Huawei EchoLife EG8145V5 Specifications

General

Product Type	GPON ONT
Power Supply	11–14 V DC, 1 A
Wi-Fi	802.11b/g/n/ac
Humidity	5% to 95% (non-condensing)
Ports	1 POTS + 1 USB
Wi-Fi Speed	300 Mbps
Antennas	2
Operating Temperature	0°C to +40°C