Use the Camera with Other Devices
Use a Bluetooth Snorkeling Case to Take Photos Underwater
When using a dedicated Bluetooth snorkeling case, you can quickly launch the camera when
you are swimming or diving, and easily take photos, zoom in or out, and switch between
modes.
• Purchase a dedicated Bluetooth snorkeling case from an ocial channel.
• Before using your phone underwater, refer to the snorkeling case user guide to ensure
that the case is fully sealed.
• Refer to the depth and duration limits of the snorkeling case. Do not use your phone in
deep water for an extended period of time.
1 Swipe down from the status bar to open the notication panel, then touch to enable
Bluetooth on your phone.
2 Refer to the snorkeling case user guide to enable Bluetooth on the case, and place the
case close to your phone.
3 Your phone will automatically detect the snorkeling case and prompt you to connect to it.
4 After the connection is set up, install the snorkeling case according to the instructions and
ensure that the case is airtight. Double-press the Power button to enter Underwater
mode. You can then:
• Take a photo: Press the shutter button.
• Take a burst photo: Press and hold the shutter button.
• Zoom: Move the zoom joystick.
• Switch between photo and video modes: Double-press the Power button.
• Pause/Resume recording: Press the shutter button when recording.
Camera and Gallery
87