EasyManua.ls Logo

Huawei Mate 20 X - Page 22

Huawei Mate 20 X
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wired Projection
You can connect your phone to an external display (for example, a TV) using a wired
connection.
It is recommended that you purchase the accessories recommended or specied by Huawei
from authorized sources.
Projection Using a Type-C Cable
1 Prepare a Type-C cable.
Use a Type-C to HDMI, Type-C to DP, or Type-C to MiniDP cable depending on your
external display.
2 Connect the Type-C end to your phone and the other end to the external display.
3 On the external display, set the corresponding HDMI, DP, or MiniDP input as the signal
source.
Projection Using a Docking Station
If you need to connect your phone to an external display and use a wired mouse and
keyboard, use a docking station with a USB port.
1 Prepare a docking station.
Multiple types of ports are available on a docking station. If your external display supports
HDMI and you need to use a wired mouse and keyboard, use a docking station with at
least one HDMI port and two USB ports.
2 Connect your phone and the external display through the docking station, then connect
the wired mouse and keyboard to the docking station.
3 On the external display, set the corresponding HDMI, DP, or MiniDP input as the signal
source.
Desktop Mode
For enhanced work
eciency, project the content of your phone onto an external display,
swipe down from the status bar to open the notication panel, then enable DESKTOP
MODE.
In DESKTOP MODE, the display of your phone will be arranged in a desktop layout, and
operations on your phone won't aect what's on the external display. For example, you can
edit a document on the external display while chatting on your phone. You don't need to
worry about missing notications, calls, or messages, as a red dot will appear on the
notication panel on the external display to keep you informed.
Use Your Phone as a Touchpad
Swipe down from the status bar to open the notication panel, then touch TOUCHPAD. You
can now do the following:
Use gestures as instructed to simulate mouse commands.
When no external keyboard is connected, click the text input box on the external display to
bring out the onscreen keyboard to input text.
Smart Features
19

Related product manuals