Huawei Maxis Wi-Fi 6 - Connect Maxis Wi-Fi 6 EasyMesh to Maxis Wi-Fi 6 Router; Device Power and Placement; Initiate Pairing Sequence; Connection Confirmation

2
Click WLAN/WPS
Wi-Fi 6 Router
1. Make sure
the Maxis Wi-Fi 6 Router and
Maxis
Wi-Fi
6 EasyMesh are powered on
and wait for them to start.
2. Keep a distance 1-2 meters between
Wi-Fi 6
Router and Wi
-
Fi 6 EasyMesh to
avoid interference when pairing.
3. Press the WLAN/WPS button on the Maxis
Wi-Fi
6 EasyMesh for more than 10
seconds, and then release the button.
4. Press the WLAN/WPS button on
Wi-Fi
6 Router for 1-2 seconds. The WLAN
indicator
blinks.
5. Wait for several seconds,
Wi-Fi
6 EasyMesh restarts automatically, and all
indicator
s will turn o.
6. After
Wi
-
Fi
6 EasyMesh restarts, Wi-Fi 6 EasyMesh successfully switches to the
bridge mode and connects to Wi-Fi 6 Router automatically. The Internet indicator
of Wi-Fi 6 EasyMesh will be
steady on
.
7. Place
Wi-Fi
6 EasyMesh in proper position. For details, see Step 3.
Step 3
We recommend selecting locations:
• 1-2 rooms away from your Maxis
Wi-Fi
6 EasyMesh.
• That avoid corners, electronics and metal objects. (like microwaves, fridges)
• That are about halfway between a
Wi-Fi
deadspot and your Maxis
Wi-Fi
6
EasyMesh.
Select the best location for your Maxis Wi-Fi 6 EasyMesh
Click WLAN/WPS
Wi-Fi 6
EasyMesh
Step 2
Connect Maxis Wi-Fi 6 EasyMesh to Maxis Wi-Fi 6 Router